Water Heaters Repair and Installation

by | Nov 15, 2011 | Repair and Service

You never know when you might have to repair or install your own water heater. In case such an event does occur one must be prepared to do so. Listed below are some useful tips which help you to effectively repair or install your water heater.

When you are going to install a water heater, the first thing that you need to check is whether the appliance is the right one for you. A water heater may be an electric heater or a gas-fuelled one. A gas-fuelled heater is relatively cheaper to operate. But, this may vary depending upon the location of your house. Moreover, if your house does not have a gas connection, then an electric heater is the only available option.

The next thing that you will have to check is the plumbing in the house. The pipes meant for the hot water and the cold water will have to match the dimensions of the water heater. If it does not match then the necessary arrangements need to be made before the installation of the heater can be carried out.

Now when it comes to the actual installation process, one must be very careful to ensure that all the electric or gas utility attachments are switched off. Once that is done, the tank holding the hot water can be drained off in order to connect the necessary pipes for the heater.

Once you have finished draining the old unit, you are ready to install the new one. Install any of the additional fittings that have been provided with the unit. The next step should be to connect the water pipes and the gas pipes and ensure that all the connections have been made correctly. You need to make sure that the gas is let out of the house properly. Once the connections have been completed properly you can safely install the water heater.

It might be a good idea to insulate the unit before you use it. It is a long term advantage as it will help in reducing undue incurring of costs and time.

Water Heaters Repair

Water Heaters Repair

Recent Articles

Categories

Archive

Similar Posts