Heating and cooling a home can be a complex job if the contractor doesn’t understand all the details of the task at hand, and this is especially true when installing a new appliance. For example, most contractors will recommend replacing the HVAC (heating, ventilation, and air conditioning) system with a similar system even though other options may serve the homeowner better. For instance, Residential HVAC in Phoenix AZ can also make use of the split or ductless system for providing cold air.
The ductless AC is a multiple unit systems that has, at least, one external condenser. Large buildings may need to make use of multiple condenser units because each one can only handle up to eight blowers each. The condenser works much like the HVAC version by compressing a refrigerant and forcing it through a series of coils. In this case, the number of coils will vary from two to nine. In other words, the system will have one condenser coil and up to eight evaporator coils. This allows the property owner precise control over various zones in the home. Plus, the split system can be reversed so that heat will enter the home instead.
For those more traditional people, the HVAC is probably the best choice. It may not give the user complete control over specific areas like the split system does, but it will provide the building with an even temperature throughout. This is often important during those colder months when family members are more prone to illness. The HVAC system can also be used for improving air quality. This is done through the use of better filter systems.
There are other ways to treat the air in the home, but these two options cover both aspects of this problem and provide the owner with the control they desire. The downside is the amount of energy that gets used. If this is a problem, then it may be time to consider a heat pump. This nifty system is used to move heat from one space to another using the least amount of energy possible.
In some ways, the heat pumps are like an AC. That is, it uses a chemical refrigerant to collect and move the heat. However, there is only a tiny amount of this refrigerant, and it takes a lot less energy to compress it so it can collect heat.
Tweet us on Twitter!
